Configuring your product

Buying for business? Get sales advice from our team email sales@directcomputers.co.uk

Kolink Regulator power supply unit 1200 W 20+4 pin ATX ATX Black

KOLINK  |  SKU : KL-R1200FG  |  Condition: Brand New  |  Code-barres: 5999094005426
£126.99
£123.99 Save £3.00 £126.99
£103.33 excluding VAT @20%
iFrame
1200 W, 100–240 V, 47–63 Hz, 8–15 A, ATX 3.0, 140 x 86 x 150 mm, Black

The REGULATOR series from Kolink offers a comprehensive set of modern features to enhance any system. With high-quality premium components and an efficient 80-Plus-Gold certified design, REGULATOR delivers a reliable supply of power, while the Fluid Dynamic Bearing fan provides whisper-quiet cooling. Thanks to its compact design, complex protection features, and a switchable semi-fanless mode, the fully modular REGULATOR series stands for flexibility, reliability, and performance.

ATX 3.0 ready with 12VHPWR 600W connector
The REGULATOR series uses an LLC + DC/DC single-rail design with full ATX 3.0 and PCIe 5.0 compatibility, to supply modern graphics cards with up to 600W via the 12VHPWR connector. To negate the need for additional adapters, a 12VHPWR 600W cable with AWG16 is provided

Switchable semi-fanless mode

The REGULATOR Series has a dedicated semi-fanless mode, which you can easily activate thanks to the switch next to the power button. This mode passively cools the power supply, when operating at up to 40%, for whisper-quiet performance at low or medium loads. At higher loads, the fan starts at low speed and is then regulated according to temperature, supporting cooling. Protecting the power supply from heat build-up, the fan switches on automatically when the temperature becomes too high.
When semi-fanless mode is disabled, the fan continues to run at a low speed even under light load.

100% Japanese capacitors

To ensure excellent performance and reliability, the REGULATOR series utilises premium Japanese capacitors.

Super-quiet FDB fan
The 120mm fan is equipped with a Fluid Dynamic Bearing (FDB), enhancing longevity and durability. The blades have an optimized curve design, to draw in air more efficiently and quietly. The wide 8mm spacing between fan grill and the fan blades guarantees low influx turbulence and better airflow performance while lowering noise.

Stable voltages with low ripple

Ensuring great stability and enhanced longevity, the REGULATOR Series offers clean supply and tight voltage regulation over the entire load range.

Strikingly compact design

A carefully curated circuit board layout allows for a housing only 15cm deep. As a result, the REGULATOR Series fits into a wide range of systems, guaranteeing quick and easy installation even when space is limited.

Extensive protective functions

Extensive safety functions have been implemented to ensure the safety of the power supply unit and the connected components. The REGULATOR Series offers a 7-fold protection circuit with overvoltage protection (OVP), undervoltage protection (UVP), overpower protection (OPP), short-circuit protection (SCP), overcurrent protection (OCP), overtemperature protection (OTP), and surge / inrush current protection (SIP).

Power
Total power 1200 W
AC input voltage 100 - 240 V
AC input frequency 47 - 63 Hz
Input current 8 - 15 A
Maximum input current (@110V) 8 A
Maximum input current (@220V) 15 A
Power Factor Correction (PFC) type Active
Combined power (+3.3V) 130 W
Combined power (+12V) 1200 W
Combined power (+5V) 130 W
Combined power (-12V) 3.6 W
Combined power (+5Vsb) 15 W
Max output current (+3.3V) 20 A
Max output current (+12V) 100 A
Max output current (+5V) 20 A
Max output current (-12V) 0.3 A
Max output current (+5Vsb) 3 A
Hold time 17 ms
Efficiency 92%
Power protection features Over voltage, Under voltage, Over current, Over power, Overheating, Short circuit, Surge and inrush
Ports & interfaces
Motherboard power connector 20+4 pin ATX
Motherboard power cable length 60 cm
Number of PATA power connectors 4
Number of SATA power connectors 3
SATA power cable length 500,650,800 mm
Number of SATA power cables 2
Peripheral (Molex) power connectors (4-pin) 4
Peripheral (Molex) power cable length 500,650,800,950 mm
EPS power connector (4+4 pin) Yes
PCI Express power connectors (6+2 pin) 2
CPU power connector (4+4 pin) Yes
CPU power cable length 65 cm
ATX power connector (20+4 pin) Yes
Cabling type Fully-Modular
Performance
Purpose PC
Power supply unit (PSU) form factor ATX
80 PLUS certification 80 PLUS Gold
ATX version 3.0
Bearing technology FDB
Mean time between failures (MTBF) 15000 h
Design
Product colour Black
Cooling type Active
Fan diameter 12 cm
On/off switch Yes
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Packaging content
Cables included CPU, PATA, SATA
Weight & dimensions
Width 140 mm
Depth 150 mm
Height 86 mm
Packaging data
Package width 295 mm
Package depth 210 mm
Package height 110 mm
Package weight 2.66 kg
Package type Box