TP-Link 5-Port 2.5G Desktop Switch with 4-Port PoE++
Key Details:
- 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports
- With four PoE++ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at/bt type3 compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 60 W for each PoE++ port
- Supports PoE Power up to 123 W for all PoE ports*
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Descripción
Descripción
Overview
TL-SG105PP-M2 is an unmanaged switch with 5 Gigabit ports that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-4. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
The 2.5G ports support automatic negotiation to 10Mbps/100Mbps/1Gbps/2.5Gbps according to the type of connected device and provide sufficient bandwidth to unlock the highest performance of 2.5G/Multi-Gigabit devices, including NAS, a personal workstation, 8K video stream, and 2.5G Wi-Fi 6 AP.
Power Over Ethernet
4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those connected IEEE 802.3af/at/bt compliant Powered Devices (PDs).
Overload Arrangement
TL-SG105PP-M2 has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, port 2, 3, and 4 is using 35 W respectively (maximum power per port is 60 W); the system power is 105W in total. If there is an additional PD inserted to port 1 with 23 W, and then the system will cut off the power of port 4 because of the overloaded power, this means port 1 will use 23 W respectively and port 2&3 will use 35 W, no power will be supplied to port 4.
Highlight Performance
- With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-4. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.
- Provides super-fast connections to 2.5G NAS, Server, 2.5G PCIe Adapter/ NIC, gaming computer, 2.5G WiFi 6 AP, 8K video, and more.
- Auto-negotiation for 10Mbps/100Mbps/1Gbps/2.5Gbps connections provide optimal performance.
TL-SG105PP-M2 is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 5-Port 2.5G Desktop Switch with 4-Port PoE++ TL-SG105PP-M2 is a great selection for expanding your network.
Management features | |
---|---|
Quality of Service (QoS) support | Yes |
Switch type | Unmanaged |
Ports & interfaces | |
---|---|
2.5G Ethernet (copper) ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Network | |
---|---|
Flow control support | Yes |
Auto MDI/MDI-X | Yes |
Auto-negotiation | Yes |
MAC address auto-learning supported | Yes |
MAC address auto-aging supported | Yes |
Cable types supported | Cat3, Cat4, Cat5, Cat5e |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
10G support | No |
Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
Data transmission | |
---|---|
Store-and-forward | Yes |
Forwarding rate | 18.6 Mpps |
Switching capacity | 25 Gbit/s |
MAC address table | 4000 entries |
Security | |
---|---|
IGMP snooping | Yes |
Design | |
---|---|
Certification | CE, FCC, RoHS |
LED indicators | Yes |
Housing material | Steel |
Product colour | Black |
Rack mounting | No |
Performance | |
---|---|
Fanless | Yes |
Power | |
---|---|
Power consumption (max) | 143.37 W |
Input voltage | 53.5 V |
Input current | 2.43 A |
AC input frequency | 50 Hz |
AC input voltage | 220 V |
Number of power supply units | 1 |
Power supply included | Yes |
Power source | DC/PoE |
Power over Ethernet (PoE) | |
---|---|
Total Power over Ethernet (PoE) budget | 123 W |
Power over Ethernet (PoE) power per port | 60 W |
Power over Ethernet 4PPoE (PoE++) ports quantity | 4 |
Power over Ethernet (PoE) | Yes |
Operational conditions | |
---|---|
Heat dissipation | 488.89 BTU/h |
Storage relative humidity (H-H) | 5 - 90% |
Operating relative humidity (H-H) | 10 - 90% |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Weight & dimensions | |
---|---|
Height | 26 mm |
Depth | 126 mm |
Width | 209 mm |
Packaging data | |
---|---|
User guide | Yes |
Package type | Box |
Cables included | AC |
Especificaciones
Especificaciones
-
Grade
-
Part Number
Grading Guide
Grading Guide
Brand New – This product is Brand New and in it’s original
packaging.
New - Open Box - This product is unused but the box has been opened.
New – No Box – This product is unused but doesn’t come with
the original box/packaging.
Refurbished – This product has been refurbished by ourselves
or by the manufacturer.
Excellent Used – This item is used, tested and fully working
but in like new condition. It may come with it’s original packaging or not,
please check the product description.
Good Used – This item is used, tested and fully working but
will show signs of cosmetic wear and tear. It may come with it’s original packaging
or not, please check the product description.
Parts – This item is sold just for parts, meaning it is
unworking or unable to serve it’s purpose. It may come with it’s original packaging
or not, please check the product description.
Warranty
Warranty
Brand New Products: All our Brand New products come with Manufaturer warranty. These can vary in length and it's important to check with the manufaturer of the product what warranty they provide and what is covered.
Used Products: All our used products come with 1 years warranty provided by us and some products may have manufaturer warranty.
Refurbished Products: With our refurbished products, we offer a free 3-month warranty which covers all software and hardware issues, that have not been influenced by the customer. There is also Manufactured Refurbished products which they will specify how long their warranty is.
Custom Gaming PCs: All our Custom PCs by default come with 3 years warranty. This includes parts and labour. You can also upgrade to 5 years warranty. Our warranty includes all hardware issues relating to the machine. If there is any faults, we will attempt to solve this remotely and if needed get the PC collected and back to base for repair.
Read more - Warranty Information
PDFs/Manuals
PDFs/Manuals
For extra information please see the manufaturers website
Found a better price?
Chat to our friendly team on live chat and we'll do our best to Price Match/Beat for you.